Polymers are one of the most fascinating materials of the present era finding their applications in almost every aspects of life. Polymers are either directly available in nature or are chemically synthesized and used depending upon the targeted applications. Advances in polymer science and the introduction of new polymers have resulted in the significant development of polymers with unique properties. Different kinds of polymers have been and will be one of the key in several applications in many of the advanced pharmaceutical research being carried out over the globe.

This 4-partset of books contains precisely referenced chapters, emphasizing different kinds of polymers with basic fundamentals and practicality for application in diverse pharmaceutical technologies. The volumes aim at explaining basics of polymers based materials from different resources and their chemistry along with practical applications which present a future direction in the pharmaceutical industry. Each volume offer deep insight into the subject being treated.

  • Volume 1: Structure and Chemistry
  • Volume 2: Processing and Applications
  • Volume 3: Biodegradable Polymers
  • Volume 4: Bioactive and Compatible Synthetic/Hybrid Polymers



Autorentext

Vijay Kumar Thakur, PhD, is a Staff Scientist in the School of Mechanical and Materials Engineering at Washington State University, U.S.A. He has published more than 100 research articles, patents and conference proceedings in the field of polymers and materials science and has published ten books and 25 book chapters on the advanced state-of-the-art of polymers/ materials science. He has extensive expertise in the synthesis of polymers (natural/ synthetic), nano materials, nanocomposites, biocomposites, graft copolymers, high performance capacitors and electrochromic materials.

Manju Kumari Thakur works in the Department of Chemistry, Himachal Pradesh University, Simla, India.



Inhalt

Preface xvii

1 Particle Engineering of Polymers into Multifunctional Interactive Excipients 1
Sharad Mangal, Ian Larson, Felix Meiser and David AV Morton

1.1 Introduction 1

1.2 Polymers as Excipients 3

1.3 Material Properties Affecting Binder Activity 6

1.3.1 Particle Size 6

1.3.2 Deformation Mechanisms 7

1.3.3 Glass Transition Temperature (Tg) 8

1.4 Strategies for Improving Polymeric Filler-Binder Performance for Direct Compression 8

1.4.1 Interactive Mixing 12

1.4.2 Challenges to Interactive Mixing 13

1.4.3 Controlling Interparticle Cohesion 14

1.5 Preparation and Characterization of Interactive Excipients 14

1.5.1 Particle Size and Size Distribution of Excipients 15

1.5.2 Effect of L-leucine on Surface Morphology 16

1.5.3 Effect of L-leucine on Surface Composition 16

1.5.4 Effect of L-leucine on Surface Energy 17

1.5.5 Effect of L-leucine on Interparticle Cohesion 18

1.6 Performance of Interactive Excipients 18

1.6.1 Blending Ability 18

1.6.2 Effect on Flow 20

1.6.3 Binder Activity 20

1.7 Investigation of the Effect of Polymer Mechanical Properties 23

1.8 Conclusion 25

References 26

2 The Art of Making Polymeric Membranes 33
K.C. Khulbe, T. Matsuura and C. Feng

2.1 Introduction 33

2.2 Types of Membranes 35

2.2.1 Porous Membranes 35

2.2.2 Nonporous Membranes 36

2.2.3 Liquid Membranes (Carrier Mediated Transport) 36

2.2.4 Asymmetric Membranes 36

2.3 Preparation of Membranes 36

2.3.1 Phase Inversion/Separation 37

2.3.2 Vapor-Induced Phase Separation (VIPS) 37

2.3.3 Thermally-Induced Phase Separation (TIPS) 37

2.3.4 Immersion Precipitation 38

2.3.5 Film/Dry Casting Technique 38

2.3.6 Track Etching 39

2.3.7 Electrospinning 39

2.3.8 Spraying 42

2.3.9 Foaming 42

2.3.10 Particle Leaching 43

2.3.11 Precipitation from the Vapor Phase 43

2.3.12 Emulsion Freeze-Drying 43

2.3.13 Sintering 44

2.3.14 Stretching 44

2.3.15 Composite/Supported 44

2.3.16 Mixed Matrix Membranes (MMMs) 45

2.3.17 Hollow Fiber Membranes 46

2.3.18 Metal-Organic Frameworks (MOFs) 48

2.4 Modification of Membranes 49

2.4.1 Modification of Polymeric Membrane by Additives/Blending 49

2.4.2 Coating 50

2.4.3 Surface Modification by Chemical Reaction 50

2.4.4 Interfacial Polymerization (IP)/Copolymerization 50

2.4.5 Plasma Polymerization/Treatment 52

2.4.6 Surface Modification by Irradiation of High Energy Particles 52

2.4.7 UV Irradiation 53

2.4.8 Ion-Beam Irradiation 53

2.4.9 Surface Modification by Heat Treatment 53

2.4.10 Graft Polymerization/Grafting 53

2.4.11 Other Techniques 53

2.5 Characterization of Membrane by Different Techniques 54

2.5.1 Conventional Physical Methods to Determine Pore Size and Pore Size Distribution 55

2.5.2 Morphology 58

2.5.3 Thermal Properties 60

2.5.4 Mechanical Properties 60

2.6 Summary 61

References 62

3 Development of Microstructuring Technologies of Polycarbonate for Establishing Advanced Cell Cultivation Systems 67
Uta Fernekorn, Jörg Hampl, Frank Weise, Sukhdeep Singh, Justyna Tobola and Andreas Schober

3.1 Introduction 67

3.2 Material Properties of Polycarbonate 71

3.2.1 Physical Properties 71

3.2.2 Chemical Properties 72

3.2.3 Biological Properties 72

3.3 Use of Polycarbonate Foils in Structuration Processes 75

3.3.1 Hot Embossing 75

3.3.2 Thermoforming 77

3.4 Simulation of Microstructuring of a Polycarbonate Foil 79

3.5 Chemical Functionalization of Polycarbonate 8...

Titel
Handbook of Polymers for Pharmaceutical Technologies, Processing and Applications
EAN
9781119041399
Format
E-Book (epub)
Hersteller
Digitaler Kopierschutz
Adobe-DRM
Dateigrösse
14.01 MB
Anzahl Seiten
496